Shenzhen, Guangdong, China alex@hangtongtech.com.cn

Connectors & Passives — Kitted Supply, One Less Supplier

Board-to-board, wire-to-board, FPC, MLCC, electrolytics, resistors and crystals. Low unit cost, high shortage risk — kitted with your ICs so one part never delays a shipment.

KittedShipped with your ICs as one lot
No minimumBreak-pack below factory quantities
Brand choiceHirose / JST / Panasonic or equivalents
12 monthsWarranty · fakes paid 10x

The cheapest part on the BOM delays the whole shipment

  • Fragmented SKUs raise management costConnectors and passives are numerous and low-value — sourcing them supplier by supplier costs more in admin time than in parts.
  • Housings and terminals must be bought togetherBuying housings without terminals, or terminals in the wrong pitch, is the most common mistake in this category.
  • Factory pack sizes far exceed usageA reel of thousands when you need hundreds — the remainder becomes dead stock.
  • One missing part blocks the orderDozens of line items complete except one terminal, and the whole shipment sits in the warehouse.

Commonly stocked and commonly sourced

Sub-category Common part number families Sourcing note
Board-to-board Hirose DF series · AXK series Pitch and stacking height drive selection; compare tolerances for substitutes
Wire-to-board JST XH / PH / SH series · Hirose DF11 series Housings and terminals must ship as a set — buying separately causes shortages
FPC / FFC Hirose FH series · JST FFC series Confirm pitch (0.5 / 1.0mm) and flip-lock type
MLCC 0402 / 0603 / 0805 common capacitance values Automotive and high-voltage grades need separate certification checks
Electrolytic capacitors Panasonic FR / FM series · common aluminium electrolytics Lifetime and temperature rating determine substitution feasibility
Crystals & resonators Seiko · Micro Crystal · Fenghua Frequency tolerance and load capacitance must be checked item by item

Connectors require confirmation of pitch, pin count, stacking height and plating — send the full part number for an accurate quote.

Frequently asked questions

Can you kit a full BOM?

Yes. Send the complete BOM including connectors and passives; we kit the whole order and ship it as one lot, flagging shortage items in advance and shipping the complete subset first.

Is there a minimum order?

No order-level minimum. Where a single part falls below factory packaging, we break packs and label the batch and break information.

Can I specify the brand?

Yes — Hirose, JST, Panasonic and others on request, or a domestic equivalent on the same spec, with a price and lead-time comparison for both.

Send your full BOM — we kit it and ship it as one lot

Connectors, passives and ICs on the same BOM are fine — we quote them together.

Отправьте список BOM — быстро получите расчёт всего заказа; большие списки можно направить прямо на alex@hangtongtech.com.cn.

Данные используются только для этого расчёта и не передаются третьим лицам. Мы свяжемся с вами в течение 24 часов.

✓ Запрос получен! Ваш персональный менеджер свяжется с вами в ближайшее время.